Basic Descriptions
This 25kwh home battery system built in BMS with LCD display. Besides all basic protections, this Battery system built in a LCD shows the details of this battery pack including information:
- Rated 48v 500Ah 25 kwh energy
- Display cells voltage and system voltage
- Temperature of cells and MOS/BMS
- Â Charging/Discharging current Display
- Capacity and State of Charge Display(SOC)
CMX as a leading server rack and Powerwall Home Battery Manufacturer in China. We focus on LiFePo4 battery, known as LFP battery, which is the longest lifecycles and safest chemistry of all kinds of lithium battery. Our home Battery Backup reach 8000 cycles at 100%DOD. Coremax offer very good price with top quality, our powerwall home battery is 10years warranty. our battery compatible with nearly all kinds of Inverters, SMA, Solar edge, Sunny island, Deye,Growatt, Goodwe, Outback etc. look for distributorse


Compatible Inverters from Customer installation site
Detail Specifications:
Item | Unit | Module Specification | Remark | |
---|---|---|---|---|
Nominal Capacity | Ah | 500Ah | Discharge at 0.5C | |
Actual Capacity | Ah | 500Ah | less then 250A | |
Configuration | - | 5pcs 16S1P modulars . 5pcs 5kwh modulars connected in parallel. | In parallel | |
Operating Temp. | Min. | ℃ | 0 (Charge).-20 (Discharge) | @ Temp Sensor |
Max. | ℃ | 55 | ||
Storage Temp. | Min. | ℃ | -20 | |
Max. | ℃ | 55 | ||
Nominal Voltage | V | 51.2 | Cell 3.2V | |
Max. Voltage | V | 58.4 | Cell 3.65V | |
Min. Voltage | V | 40 | Cell 2.5V | |
Nominal Energy Content | kWh | ≥ 25kWh 25 kw solar system | ||
Weight | Kg | ≤300kg | ||
Resistance Consistency (10s, 25℃, 30%SOC, BOL) | - | -15%/+10% DC-IR | ||
Discharge Operation max current (10s, 25℃, SOC50%, BOL) | A | 500amps (by busbar in parallel installation) | 120 Per 1 module | |
Charge Operation max current (10s, 25℃, SOC 50% BOL) | A | 250A(0.5C ) | 90Per 1 module | |
Continuous Discharge Operation current (25℃, SOC50%, BOL) | A | 250A(0.5C discharge) | 105 Per 1 module | |
Continuous Charge Operation current (25℃, SOC 50% BOL) | A | 200Amps | 52.5 Per 1 module | |
Standard Charge (@ 25℃ ) | - | Constant Current: ≤0.5C Constant Voltage:3.65V End Condition(Cut off): ≥0.02C | for cells | |
The state of charge(SOC) of the module | - | SOC 30%±3% | before shipping | |
Self Discharge Rate(SOC 100%, 25℃ , Loss/Month, @BOL) | % | Max 3 | ||
Safety and Reliability | - | Compliance with QC/T 743 test standard | GBT Certificate @cell | |
Insulation | MΩ | Min 20MΩ/1000VDC, 25℃±5℃, RH50% | ||
Cooling type | - | Natural(Passive) Convection | (Air Cooling) |
Computer Monitor Software


Other Features
25 kw solar system Lithium-ion based residential energy storage has been around for a couple of years. There are also open concepts that work with most solar battery technologies and any existing grid connect inverter, such as sma solar battery Storage System or any other brand existing retrofit solar system.
- -Safety
25 kw solar system are a practical and economical battery system based on Lithium-iron-phosphate technology (LFP or LiFePO4). - -scalable
Available in standard 5kWh modules, the LFP battery modules can be easily scaled in multiples up to 200kWh in a single installation, making them suitable for a range of applications. - -Efficient
Coremax 25 kw solar system feature a round-trip efficiency of 92%, low self discharge rate of 3+ years, and unlike traditional lead acid battery.
This 48v 500ah solar battery bank is scalable energy storage based on 5pcs 48v 100ah CMX48100S. The system include LiFePO4 solar 48v 500Ah 25KWH System and the server rack cabinet.
Flexible use
This 48 Volt 25 kwh battery pack design for Solar Power Systems Battery Storage. 48v 500Ah is built-in high quality BMS battery management system, which can manage and monitor cells information ,including voltage, current and temperature etc. Also, our BMS can balance cells charging and discharging to extend cycle life. Multiple batteries can connected in parallel to expand capacity and power in parallel for larger capacity and longer power.
Highlights
- Long lifetimes - 8000 cycles @80% DOD (dependant on actual DOD, usage & temp.) and low self-discharge rate
- Easily scalable and stackable 5kWh modules
A self-designed BMS protects the cell from overcharge, over-discharge, over current, short circuit . - Built-in accessible 125A DC breaker On/Off switch - increases safety .
- Communication Protocol: RS232/RS485/Canbus
- Simple rack-based installation system
- LCD display available

Final assemble on the rack mount Storage packs.Â


25 kw solar system for small mini solar farm in Los Angeles

25kw solar energy storage system for offgrid farm in NZ.
Shipping
Shipping heavy Lithium battery storage system is a challenge oversea. Thanks to professional packing and shipping company cooperated with Coremax. All batteries and accessories well packed with thick foam and in wooden case. The best way to protect it from damage during shipping.

Tomasa Loforte –
Hi George,For car starting purpose, it is not recommended to choose LiFePO4 battery.It is better to choose a good car battery, lead acid technology.LiFePO4 battery will not win at instant high current.If for constant current, most of the LiFePO4 batteries can only keep working at 1C current, or maybe lower.This means your 32Ah battery can be working at 32A, 4 cells is 12.8V, the constant power is 409.6W.It seems not able to run your 1.4kW motor and DO remember to get a protection circuit board for your LiFePO4 pack.Andy
Ron Nelson –
the battery package we ordered is currently being tested in daily usage is working well.
rene –
I managed to modify the victron software to give higher voltage for all pylontech. Now works fine. Thought you might know. Maybe other customers have same issues.
RENE –
I did have an issue with the new units. The protocol is somewhafferent. First units worked, but were not labeled as ‘pylontech’, but as ‘#.’ or something. Worked. New units get classified as ‘Pylontech batteries’ in victron. But the new batteries don’t get charged passed 47% or 52.5v. Which is the limit for 15s pylontech batteries. These units are 16s, zo require different voltages. But victron keeps the settings locked. Probably a fix coming for it in new beta version.